Network Devices
Ethernet Switches / Hub Devices
DLS18GBX OPT
- Manufacturer:
- ELC
- Dimensions:
- W: 483 × D: 165 × H: 44mm Device only
- Weight:
- 2.85 kg
- Connectors:
- ・In/Output power: Neutrik PowerCon TRUE1
・Data:
2x 2.5Gbps Neutrik OpticalCon Duo
8× 1Gbps Network Ports with PoE
(802.3af-2003 Standard) on the
front with RGB LED
8× 1Gbps Network Ports on the rear
- Protocols:
- sACN(Net3)
Art-Net
MA-Net
Hog-Net
Dante
- AC Power:
- 100-240V 50-60Hz
- Consumption Power:
- Max. 120w
- Protection Rating:
- IP20
- Features:
- ・The configuration of virtual networks (VLAN), redundant network links, and
trunks can be easily and simply achieved by means of the integrated color
screen or the free software dmXLAN.
・The DLS18OPT has eight-gigabit Ethercon ports with PoE (IEEE 802.3af-2003) on the front. The back panel features eight-gigabit Ethercon ports with no PoE and 2 SFP+ Cages with a data rate of up to 2.5 Gbit for SFP+ fiber modules.
- Signal Cable Type:
- ・UTP, STP, eCAT5 or later: recommended CAT6 Straight Ethernet
・Neutrik OpticalCon Duo
- Accessory:
- Power cable: Edison-TRUE1
- Options:
- Data cables: eCAT5 or later, Neutrik OpticalCon Duo
- Note:
- • Local color touch screen and rotary encoder
• Supported by dmXLAN V4 software
- Rack Case Dimensions:
- Flight case: W: 540 × D: 725 × H: 75mm
MA Network Switch
- Manufacturer:
- MA Lighting
- Dimensions:
- W: 483 × D: 264 × H: 43mm Device only
- Weight:
- 3.7 kg Device only
- AC Power:
- 100-240V 50/60Hz
- Maximum Consumption Power:
- 100VA
- In/Output:
- ・Output connectors:
9x etherCON
4x prepared SFP Cages for Mini-GBIC
・Input connectors:
1x powerCON
1x USB Type B
・Input Power: 1x Neutrik PowerCon
- Protocols:
- MA-Net
MA-Net2
Art-Net
sACN
- Features:
- The ability to define port filtering with the common entertainment protocols combined with standard Ethernet protocols like IGMP and RSTP allows the switch to perform best in fixed installation as well as in temporary installations.
- Accessory:
- Power cable: Edison-PowerCON
- Options:
- ・Ethernet cables
・XLR 5-pin data cables
GigaCore 10
- Manufacturer:
- Luminex
- Dimensions:
- W: 220 × D: 330 × H: 44mm (8,66" x 13" x 1,73") Device only
- Weight:
- 2.8 kg (6.1lbs) Device only
- AC Power:
- 100-240V 50/60Hz
- Consumption Power:
- Max. 20w
- Connectors:
- ・Input Power: 1x Neutrik powerCON TRUE1
・Ethernet connectivity: 8x Shielded Neutrik Ethercon connectors
・Fiber connectivity: 2x slot for rugged fiber connectors
- Supported Protocols:
- Avnu AVB/MILAN
Dante©
RAVENNA/AES67©
Ethersound©
Q-LAN
REAC©
sACN
ArtNet
MANet2
HogNet
RTTrPL (BlackTraX)
IEEE 802.1p CoS (Class of Service)
DiffServ (DSCP)
PoE (802.3af) (optional)
PoE+ (optional)
IEEE 1588 PTP V2
Sound protocol compliance: Yes (low jitter)
Ethernet compliance: IEEE 802.3, IEEE 802.3u, IEEE 802.3x Flow Control, IEEE 802.3ab Gigabit Ethernet
- Features:
- ・RLinkX (Link redundancy): Yes
・Groups (VLAN segmentation): Yes
・IGMP support: Yes (V1/V2/V3)
・IGMP snooping: Yes, enabled by default
・PoE supply: Optional on all ports (up to 130W in total)
- Signal Cable Type:
- ・UTP, STP, eCAT5 or later
・50/125μ type-GI Multimode fiber optic cables
- LED Indicators:
- ・Power (General status LED)
Green: All OK
Green blink: The unit is writing to the flash. Do not disconnect the power.
Orange: Temperature warning
Red blink: Temperature or Fan error
Red/Green blink: The unit is flashing new firmware. Do not disconnect the power.
・Link
Off: No link
Green: Gigabit connection
Orange: 10/100 Mbps connection
Blink: Activity
- Accessories:
- ・Power cable: Edison-PowerCON TRUE1
・1x EL original clamp
・1x dowel (attached to the device)
- Options:
- ・50/125μ type-GI Multimode fiber optic cables
・Ethernet cables
- Notes:
- ・Please access the Luminex Network, for a more detailed setting.
・The unit can be mounted in a truss, on a wall or in a rack, which makes it suitable for many applications.
GigaCore 16RFO
- Manufacturer:
- Luminex
- Dimensions:
- W: 482 × D: 295 × H: 89mm: Device only
W: 550 × D: 460 × H: 120mm: Rack case
- Weight:
- 6 kg
- AC Power:
- 100-240V 50/60Hz
- Consumption Power:
- Max. 30w
- In/Output:
- ・Input Power: Neutrik PowerCON TRUE1: 2x IN / 2x Out
Data:
・Ethernet connectivity: 12x Shielded Neutrik Ethercon connectors
・Fiber connectivity: 4x slot for rugged fiber connectors
・Serial: 1x serial RJ45 console port
- Protocols:
- Dante©
RAVENNA/AES67©
Ethersound©
Q-LAN
REAC©
sACN
ArtNet
MANet2
HogNet
RTTrPL (BlackTraX)
IEEE 802.1p CoS (Class of Service)
DiffServ (DSCP)
PoE (802.3af) (optional)
PoE+ (optional)
IEEE 1588 PTP V2
Sound protocol compliance: Yes (low jitter)
- Features:
- ・RLinkX (Link redundancy): Yes
・Groups (VLAN segmentation): Yes
・MultiLinkX (Link aggregation): Yes
・Profile manager: Yes
・Memory: 4Mb
・MAC address table:
Address learning / Aging: Self-learning, Auto aging
・Switching throughput: 32Gbps
・IGMP support: Yes (V1/V2/V3)
・IGMP snooping: Yes, enabled by default
・Port sensing: Auto-negotiation
・Auto crossover: MDI / MDIX
・Auto-sensing: Full or Half-Duplex (Gigabit is Full Duplex)
- Accessory:
- 2x Power cable: Edison-Neutrik powerCON TRUE1
- Options:
- ・50/125μ type-GI Multimode fiber optic cables
・Ethernet cables
- Notes:
- ・PoE: optional
・The LED display and encoder knob allows for front panel configuration and reporting of the most commonly used features, such as IP address and subnet mask, and protocol selection.
・Please access the Luminex Network, for a more detailed setting.
CentreCOM GS908L V2
- Manufacturer:
- Allied Telesis
- Dimensions:
- W: 403 x D: 243 x H: 46mm
- Weight:
- 3.0 kg Device only
- In/Output Connectors:
- Power: Edison with Ground
Data: 8x 1Gbps Neutrik EtherCON
- AC Power:
- 100-240V 50/60Hz
- Note:
- PoE: optional
- Rack Case Dimensions:
- Flight Case:
W: 535 x D: 360 x H: 67mm
- Note:
- No function setting
ES10F
- Manufacturer:
- Tama Tech Lab.
- Dimensions:
- W: 432 x D: 265 x H: 46mm
- Weight:
- 4.2 kg Device only
- In/Output Connectors:
- Power: Edison with Ground
Data:
2x 1Gbps Neutrik OpticalCON DUO
8x 100Mbps Neutrik EtherCON
- AC Power:
- 90-240V 50/60Hz
- Features:
- ・X-RING (Link redundancy, recovery)
・RSTP/STP (802.1w/1D)
・Port-based VLAN
・Tagged-based VLAN (802.1Q)
・PoE compliance: Max. 100w
- Rack Case Dimensions:
- Flight Case:
W: 537 x D: 395 x H: 73mm
- Notes:
- ・The basic setting for OpticalCON is X-RING: OFF, Port Trunk: ON. Please ask our staff in advance if you modify the setting.
・Please access the Tama Tech Lab. website, for a more detailed setting.
Pathport VIA 12
- Manufacturer:
- Pathway Connectivity
- Dimensions:
- W: 432 x D: 152 x H: 40mm
- Weight:
- 2.4 kg Device only
- In/Output Connectors:
- Power: Neutrik PowerCON (Power cable: Edison with Ground-PowerCON)
Data:
2x 1Gbps Neutrik OpticalCON DUO
12x 1Gbps Neutrik EtherCON
- AC Power:
- 85-250V 50/60Hz
- Features:
- ・Features include IGMP querier and snooping, DHCP server per VLAN, bandwidth monitor, Dante-compliant QoS option, EAPS, ring protection, Rapid Spanning Tree (RSTP)
・Hardware supports PoE (with external power supply)
- Rack Case Dimensions:
- Flight Case:
W: 537 x D: 400 x H: 73mm
- Notes:
- ・ Global properties editable from front panel interface: IP Address, Subnet Mask, Default Gateway, VLAN configuration, Link speed, PoE allocation, DHCP pool, ring protection.
・Please install the software, Pathport Manager, for a more detailed setting.
・The basic setting for OpticalCON is ring protection: ON. Please ask our staff in advance if you modify the setting.
Pathport VIA 10
- Manufacturer:
- Pathway Connectivity
- Dimensions:
- W: 432 x D: 152 x H: 40mm
- Weight:
- 2.4 kg Device only
- In/Output Connectors:
- Power: Edison with Ground
Data:
10x 1Gbps Neutrik EtherCON
1x Mini-GBIC
- AC Power:
- 85-240V 50/60Hz
- Features:
- ・Tagged-based VLAN (802.1Q)
・60W on-board Power-over-Ethernet supply-enough for ten Class 1
・PoE devices and expandable with auxiliary supply
- Features:
- Tagged-based VLAN(802.1Q)
PoE compliance: Max. 60w
- Rack Case Dimensions:
- Flight Case:
W: 537 x D: 340 x H: 73mm
- Notes:
- ・ Global properties editable from front panel interface: IP Address, Subnet Mask, Default Gateway, VLAN configuration, Link speed, PoE allocation, DHCP pool, ring protection.
・Please install the software, Pathport Manager, for a more detailed setting.
