RENTALS

Network Devices

Ethernet Switches / Hub Devices

DLS18OCT

MA Network Switch

Manufacture:
MA Lighting
Dimensions:
W:483 × D:264 × H:43mm Device only
Weight:
3.7kg Device only
AC Power:
100-240V 50/60Hz
Consumption Power:
100VA
In/Output:
・Output connectors:
9 x etherCON
4 x prepared SFP Cages for Mini-GBIC
・Input connectors:
1 x powerCON
1 x USB Type B
・Input Power: 1 x Neutrik PowerCon
Protocols:
・MA-Net
・MA-Net2
・Art-Net
・sACN
Features:
The ability to define port filtering with the common entertainment protocols combined with standard Ethernet protocols like IGMP and RSTP allows the switch to perform best in fixed installation as well as in temporary installations.
Accessory:
Power cable: Edison-PowerCON
Options:
・Ethernet cables
・XLR 5-pin data cables

GigaCore 10

Manufacture:
Luminex
Dimensions:
W:220 × D:330 × H:44mm (8,66" x 13" x 1,73")
Device only
Weight:
2.8kg (6.1lbs) Device only
AC Power:
100-240V 50/60Hz
Consumption Power:
Max. 20W
Connectors:
・Input Power: 1 x Neutrik powerCON TRUE1
・Ethernet connectivity: 8 x Shielded Neutrik Ethercon connectors
・Fiber connectivity: 2 x slot for rugged fiber connectors
Supported Protocols:
・Avnu AVB/MILAN
・Dante©
・RAVENNA/AES67©
・Ethersound©
・Q-LAN
・REAC©
・sACN
・ArtNet
・MANet2
・HogNet
・RTTrPL (BlackTraX)
・IEEE 802.1p CoS (Class of Service)
・DiffServ (DSCP)
・PoE (802.3af) (optional)
・PoE+ (optional)
・IEEE 1588 PTP V2
・Sound protocol compliance: Yes (low jitter)
・Ethernet compliance: IEEE 802.3, IEEE 802.3u, IEEE 802.3x Flow Control, IEEE 802.3ab Gigabit Ethernet
Features:
・RLinkX (Link redundancy): Yes
・Groups (VLAN segmentation): Yes
・IGMP support: Yes (V1/V2/V3)
・IGMP snooping: Yes, enabled by default
・PoE supply: Optional on all ports (up to 130W in total)
Signal Cable Type:
・UTP, STP, eCAT5 or later
・50/125μ type-GI Multimode fiber optic cables
LED Indicators:
・Power (General status LED)
Green: All OK
Green blink: The unit is writing to the flash. Do not disconnect the power.
Orange: Temperature warning
Red blink: Temperature or Fan error
Red/Green blink: The unit is flashing new firmware. Do not disconnect the power.

・Link
Off: No link
Green: Gigabit connection
Orange: 10/100 Mbps connection
Blink: Activity
Accessories:
・Power cable: Edison-PowerCON TRUE1
・1 x EL original C-clamp
・1 x dowel (attached the device)
Options:
・50/125μ type-GI Multimode fiber optic cables
・Ethernet cables
Notes:
・Please access the Luminex Network, for a more detailed setting.
・The unit can be mounted in a truss, on a wall or in a rack, which makes it suitable for many applications.

GigaCore 16RFO

Manufacture:
Luminex
Dimensions:
W:482 × D:295 × H:89mm: Device only
W:550 × D:460 × H:120mm: Load case
Weight:
6kg
AC Power:
100-240V 50/60Hz
Consumption Power:
Max. 30W
In/Output:
・Input Power: Neutrik PowerCON TRUE1: 2 x IN / 2 x Out
Data:
・Ethernet connectivity: 12 x Shielded Neutrik Ethercon connectors
・Fiber connectivity: 4 x slot for rugged fiber connectors
・Serial: 1 x serial RJ45 console port
Protocols:
・Dante©
・RAVENNA/AES67©
・Ethersound©
・Q-LAN
・REAC©
・sACN
・ArtNet
・MANet2
・HogNet
・RTTrPL (BlackTraX)
・IEEE 802.1p CoS (Class of Service)
・DiffServ (DSCP)
・PoE (802.3af) (optional)
・PoE+ (optional)
・IEEE 1588 PTP V2
・Sound protocol compliance: Yes (low jitter)
Features:
・RLinkX (Link redundancy): Yes
・Groups (VLAN segmentation): Yes
・MultiLinkX (Link aggregation): Yes
・Profile manager: Yes
・Memory: 4Mb
・MAC address table:
Address learning / Aging: Self-learning, Auto aging
・Switching throughput: 32Gbps
・IGMP support: Yes (V1/V2/V3)
・IGMP snooping: Yes, enabled by default
・Port sensing: Auto-negotiation
・Auto crossover: MDI / MDIX
・Auto-sensing: Full or Half-Duplex (Gigabit is Full Duplex)
Accessory:
2 x Power cable: Edison-Neutrik powerCON TRUE1
Options:
・50/125μ type-GI Multimode fiber optic cables
・Ethernet cables
Notes:
・PoE: optional
・The LED display and encoder knob allows for front panel configuration and reporting of the most commonly used features, such as IP address and subnet mask, and protocol selection.
・Please access the Luminex Network, for a more detailed setting.

CentreCOM GS908L V2

Manufacture:
Allied Telesis
Dimensions:
W:403 x D:243 x H:46mm
Weight:
3.0kg Device only
In/Output Connectors:
Power: Edison with Ground
Data: 8 x 1Gbps Neutrik EtherCON
AC Power:
100-240V 50/60Hz
Note:
PoE: optional
Load Case Dimensions:
Flight Case:
W:535 x D:360 x H:67mm

ES10F

Manufacture:
Tama Tech Lab.
Dimensions:
W:432 x D:265 x H:46mm
Weight:
4.2kg Device only
In/Output Connectors:
Power: Edison with Ground
Data:
2 x 1Gbps Neutrik OpticalCON DUO
8 x 100Mbps Neutrik EtherCONx8
AC Power:
90-240V 50/60Hz
Features:
・X-RING (Link redundancy, recovery)
・RSTP/STP (802.1w/1D)
・Port-based VLAN
・Tagged-based VLAN (802.1Q)
・PoE compliance: Max. 100w
Load Case Dimensions:
Flight Case:
W:537 x D:395 x H:73mm
Notes:
・The basic setting for OpticalCON is X-RING: OFF, Port Trunk: ON. Please ask our staff in advance if you modify the setting.
・Please access the Tama Tech Lab. website, for a more detailed setting.

Pathport VIA 12

Manufacture:
Pathway Connectivity
Dimensions:
W:432 x D:152 x H:40mm
Weight:
2.4kg Device only
In/Output Connectors:
Power: Neutrik PowerCON (Power cable: Edison with Ground-PowerCON)
Data:
2 x 1Gbps Neutrik OpticalCON DUO
12 x 1Gbps Neutrik EtherCON
AC Power:
85-250V 50/60Hz
Features:
・Features include IGMP querier and snooping, DHCP server per VLAN, bandwidth monitor, Dante-compliant QoS option, EAPS, ring protection, Rapid Spanning Tree (RSTP)
・Hardware supports PoE (with external power supply)
Load Case Dimensions:
Flight Case:
W:537 x D:400 x H:73mm
Notes:
・ Global properties editable from front panel interface: IP Address, Subnet Mask, Default Gateway, VLAN configuration, Link speed, PoE allocation, DHCP pool, ring protection.
・Please install the software, Pathport Manager, for a more detailed setting.
・The basic setting for OpticalCON is ring protection: ON. Please ask our staff in advance if you modify the setting.

Pathport VIA 10

Manufacture:
Pathway Connectivity
Dimensions:
W:432 x D:152 x H:40mm
Weight:
2.4kg Device only
In/Output Connectors:
Power: Edison with Ground
Data:
10 x 1Gbps Neutrik EtherCON
1 x Mini-GBIC
AC Power:
85-240V 50/60Hz
Features:
・Tagged-based VLAN (802.1Q)
・60W on-board Power-over-Ethernet supply-enough for ten Class 1
・PoE devices and expandable with auxiliary supply
Load Case Dimensions:
Flight Case:
W:537 x D:340 x H:73mm
Notes:
・ Global properties editable from front panel interface: IP Address, Subnet Mask, Default Gateway, VLAN configuration, Link speed, PoE allocation, DHCP pool, ring protection.
・Please install the software, Pathport Manager, for a more detailed setting.

Ethernet / DMX Node Devices

ProPlex IQ Two 1616

Manufacture:
TMB
Dimensions:
W:483 × D:203 × H:90mm (19" x 8" x 3.5")
Weight:
3.8kg (8.4 lbs) Device only
AC Power:
100-240V 50/60Hz
Connectors:
・In/Output Power: Neutrik PowerCon NAC3MPA
・In/Output Data:
2 x RJ45 Network ports: Network Port 1 supports PoE IN (802.3af)
16 x DMX XLR5 female ports
Protocols:
・Ethernet: Art-Net, sACN
・DMX: DMX512

NOTE: You cannot use RDM when you are using the sACN protocol because the sACN protocol (E1.31) doesn't currently support RDM officially. Once ratified, this will be a simple software update for the IQ nodes,
(ProPlex IQ Two 1616 2x USER MANUAL, pp. 21.).

Features:
・1x LCD touchscreen
・Input or output on any connector
・RGBW activity LEDs at each output port
・Merge Art-Net or Streaming ACN from multiple sources
・Selectable one of four options for "DMX out refresh rate" (Adaptive, 20Hz, 30Hz, 40Hz)
Notes:
・Large touchscreen for quick, easy setup and operation
・RDM Manager software available for system setup and feedback
Accessory:
Edison-PowerCON power cable
Option:
XLR 5pin male-male adapters for DMX inputs

dmXLAN nodeGBx 8

Manufacture:
ELC
Dimensions:
W:483 × D:150 × H:44mm Device only
Weight:
3.5kg Device only
AC Power:
100-230V 50/60Hz
Connectors:
・Input Power: Neutrik TRUE1
・In/Output Data:
2 x 1Gbps Neutrik EtherCon
8 x 5 pin XLR (female)
Protocols:
Ethernet: Art-Net, sACN(Net3), ShowNet
DMX: DMX512(1990), DMX512-A (RDM compliance)
Features:
・DMX output options: normal, merging in HTP, LTP, channel custom, priority merging, full soft patch (channel by channel), programmable merging with DMX channel control.
・The Resend option can be used to send the merged signal onto the network again as a new universe.
・Support for WYSIWYG, ESP, Capture
Signal Cable Type:
UTP, STP, eCAT5 or later
Accessory:
Edison-TRUE1 power cable
Options:
・CAT5, 6 Ethernet cables (Straight, Crossover)
・Ethernet Switches
・XLR 5pin male-male adapters for DMX inputs
Notes:
・Available to assign DMX in/output, universes, protocols, rate and IP address via the device.
・Please install ELC’s freeware dmXLAN software for a more detailed setting, such as data splitting, merging, soft patching, and backup.
Load Case Dimensions:
W:540 × D:310 × H:75mm

dmXLAN nodeGBx 8

Manufacture:
ELC
Dimensions:
W:483 × D:150 × H:44mm: Device
W:540 × D:310 × H:75mm: Load case
Weight:
3.5kg
AC Power:
100-240V 50/60Hz
Consumption Power:
Max. 10w
Connectors:
Input Power: Edison with Ground
In/Output Data: 2 x 1Gbps Neutrik EtherCon, 8 x 5 pin XLR (female)
Protocols:
Ethernet: Art-Net, sACN(Net3), ShowNet
DMX: DMX512(1990), DMX512-A (RDM compliance)
Features:
・DMX output options: normal, merging in HTP, LTP, channel custom, priority merging, full soft patch (channel by channel), programmable merging with DMX channel control.
・The Resend option can be used to send the merged signal onto the network again as a new universe.
Option:
5-pin XLR male to male adapters
Notes:
・Available to assign DMX in/output, universes, protocols and IP address via the device.
・Please install ELC’s freeware dmXLAN software for a more detailed setting, such as data splitting, merging, soft patching, and backup.

Net3 4-Port Gateway

Manufacture:
ETC
Dimensions:
W:216 × D:208 × H:44mm Device only
Weight:
2.7kg Device only
AC Power:
8-28V (PoE compliance)
Consumption Power:
Max. 5w
Control:
・DMX512 4-port
・Up to 2,048 channels in combination of data input or output
Functions:
The Four-Port Gateway uses bidirectional Ethernet communication with other network devices to send or receive DMX512 and Remote Device Management (RDM) signals, ETC Net3, ACN, and sACN.
Notes:
・Please order Ethernet cable as necessary.
・Due to PoE compliance system, AC power cable is optional.
Load Case Dimensions:
Flight Case:
W:550 × D:320 × H:75mm (Dual Top)

Pathport OCTO

Manufacture:
Pathway Connectivity
Dimensions:
W:432 x D:152 x H:40mm
Weight:
2.2kg Device only
In/Output Connectors:
Power cable: Edison with Ground
Data:
1 x 100Mbps Neutrik EtherCONx1
8 x DMX 5-pin (female)
AC Power:
85-240V 50/60Hz
Protocols:
Ethernet: ArtNet, sACN(Net3), Pathport, ShowNet
DMX: DMX-512A, DMX512(1990), RDM
Functions:
Map up to eight sources to each output channel, with merge and/ or priority options user-set for each source.
Load Case Dimensions:
Flight Case:
W:535 x D:325 x H:73mm
Notes:
・The LCD display and encoder knob allow for front panel configuration and reporting of the most commonly used features, such as IP address and subnet mask, port direction and protocol selection.
・Front panel UI supports configuration of IP settings, port direction, basic patching and more.
・Route DMX on either a universe or channel-by-channel basis.
・Please install the software, Pathport Manager, for a more detailed setting.
・Please order XLR5-pin male-male adapters if necessary if the device is assigned as 5-port input mode.

Pathport Quattro

Manufacture:
Pathway Connectivity
Dimensions:
W:217 x D:178 x H:44mm
Weight:
1.0kg Device only
In/Output Connectors:
Input Power: DC Jack with Edison AC adapter
Input Data:
1 x 100Mbps Neutrik EtherCON
4 x DMX 5-pin (female)
DC Power:
・Auxiliary input voltage 24-48V
・Operates on PoE (Power-over-Ethernet)
Protocols:
Ethernet: ArtNet, sACN(Net3), Pathport, ShowNet
DMX: DMX-512A, DMX512(1990), RDM
Functions:
Map up to eight sources to each output channel, with merge and/ or priority options user-set for each source.
Load Case Dimensions:
Plastic Cardboard Case:
W:286 x D:238 x H:157mm
Notes:
・The LCD display and encoder knob allow for front panel configuration and reporting of the most commonly used features, such as IP address and subnet mask, port direction and protocol selection.
・Front panel UI supports configuration of IP settings, port direction, basic patching and more.
・Route DMX on either a universe or channel-by-channel basis.
・Please install the software, Pathport Manager, for a more detailed setting.
・Please order XLR5-pin male-male adapters if necessary if the device is assigned as 5-port input mode.

Net Lynx IP/OP

Manufacture:
Artistic Licence
Dimensions:
W:195 × D:55 × H:115mm
W:197 × D:58 × H:22mm:
with truss-mounted
Weight:
0.7kg: Device only
1.2kg: with truss-mounted
Input Protocols:
・2 x DMX512
・DMX512 (1990)
・DMX512-A
Output Protocols:
Art-Net
DC Power:
9V DC-48V
Consumption Power:
2w
Functions:
・Ethercon XLR/RJ45 10BaseT ethernet port, compatible with Art-Net.
・2 x DMX512 inputs, compatible with all variants of DMX.
・Ethernet data activity indicator
・DMX data activity indicators

Data-Lynx O/P

Manufacture:
Artistic Licence
Dimensions:
W:440 x D:220 x H:45mm
Weight:
2.4kg Device only
In/Output Connectors:
Input Power: Edison with Ground
Input Data:
2 x 100Mbps Neutrik EtherCon
12x XLR 5-pin (female)
AC Power:
90-250V 50/60Hz
Protocols:
Ethernet: ArtNet
DMX: DMX512-A
Features:
The product accepts Art-Net (the public domain protocol invented by Artistic Licence) and sACN (the standard managed under ESTA/ PLASA E1.31).
Load Case Dimensions:
Flight Case:
W:535 x D:360 x H:73mm
Notes:
・Please install DMX-Workshop™ for a more detailed setting, such as The ‘Configure Node’ option, ‘Copy to clipboard’, ‘Merge Controls’, ‘Indicators’,‘ RDM Devices’, and ‘Configure IP Address’.
・DMX-Workshop™ is a software application that runs on the Windows XP & Windows 7 platforms. It is free of charge and available via download from the Artistic Licence website.
・2x Ethernet (front/ rear) are isolated use.

MA-Net

grandMA3 Processing Unit L

Manufacture:
MA Lighting Technology
Dimensions:
W:482 × D:372 × H:87mm Device only
Weight:
5kg Device only
AC Power:
100-240V 50/60Hz Auto-ranging electronic switch-mode
Features:
・Expanding the grandMA3 system
・Parameters: 8,192 (HTP/LTP)
・Parameters Mode2: 4,096 (HTP/LTP)
・8 x DMX512-A Out (5pin XLR female)
・2 x etherCON/RJ45
・5” LCD Touchscreen
・3 x USB 2.0 (type A)
Note:
・grandMA3 Nodes can be booted into Mode2 to be used with grandMA2 products and software.
Accessory:
Edison-TRUE1 power cable
Load Case Dimensions:
W:550 × D:500 × H:160mm

grandMA3 8Port Node

Manufacture:
MA Lighting Technology
Dimensions:
W:482 × D:189 × H:43mm Device only
Weight:
2kg Device only
AC Power:
100-240V 50/60Hz Auto-ranging electronic switch-mode
Features:
・8 x DMX512-A Out (5-pin XLR female, RDM compliance)
・1 x etherCON / RJ45
・3.9" Colour display on the front make configuration easy and provides a quick overview
・1 x USB 2.0 (Type A)
・MA-Net3, MA-Net2, sACN, and Art-Net compatible
・Remotely configurable via any grandMA3 console or onPC workstation
・Parameters: None
Note:
・grandMA3 Nodes can be booted into Mode2 to be used with grandMA2 products and software.
Accessory:
Edison-TRUE1 power cable
Load Case Dimensions:
W:510 × D:315 × H:75mm

MA NPU (Network Processing Unit)

Manufacture:
MA Lighting
Dimensions:
W:485 × D:332 × H:126mm
Weight:
9kg Device only
Control:
DMX512 8-port 4,096 HTP/LTP parameters
AC Power:
110-220V 50/60Hz
Output Connectors:
・8 x XLR 5pin (DMX)
・3 x USB
・1 x etherCON
Features:
Real-time calculation for up to 65,536 parameters with a grandMA2 system (up to 256 DMX universes)
1 internal command touchscreen (7")
Accessory:
Power cable
Load Case Dimensions:
Flight Case:
W:523 × D:523 × H:177mm

MA 8Port Node onPC

Manufacture:
MA Lighting
Dimensions:
W:482 × D:190 × H:43mm
Weight:
2.2kg Device only
Control:
DMX512 8-port 2,048 parameters
AC Power:
110-240V 50/60Hz
Output connectors:
8 x XLR 5pin (DMX)
1 x CTRL (future use)
1 x etherCON
Note:
Can be combined with MA onPC command wing and MA onPC fader wing for parameter expansion (Max. 4,096 parameters)
Accessory:
Power cable
Load Case Dimensions:
Flight Case:
W:540 × D:323 × H:74mm

MA 2Port Node onPC PRO

Manufacture:
MA Lighting
Dimensions:
W:160 × D:145 × H:50mm
Weight:
1.1kg Device only
Control:
DMX512 2-port 1,024 parameters (MA 2Port Node onPC PRO)
AC Power:
100-240V 50/60Hz
Output connectors:
2x DMX in (female)
1x Ethercon
Functions:
・If used with grandMA2 onPC, the MA 2Port Node onPC outputs also 512 parameters of DMX (1,024 parameters as MA 2Port Node onPC PRO) and becomes a powerful show controller for smaller applications.
・Handy backup solution: If used with 2 consoles as main and backup via MA-Net, and they plugin output of 2Port Node Pro, they are available to assign main and backup console via 2Port Node Pro without unplugging cables.
Notes:
Available to assign setting via MA on PC.
MA 2Port Node Pro is not intended to expand parameters for MA consoles. Please order NSP if necessary.
Accessory:
LAN cable (3m)
Load Case Dimensions:
Plastic Cardboard Case:
W:240 × D:200 × H:135mm

MA NSP (Network Signal Processor)

Manufacture:
MA Lighting
Dimensions:
W:483 × D:190 × H:44.5mm Device only
Weight:
3kg Device only
Control:
DMX512 4-port 2,048 parameters
AC Power:
90-230V 50/60Hz
In/Output Connectors:
・DMX512
・1990-port: 4output, or 3out and 1in, or 2out and 2in.
・Ethernetwork: 10/100 base-T/X
Internal Backup System:
128M bite Flash
Functions:
・In an MA System, the MA NSP can be used as a decentralized channel expansion for all grandMA consoles.
・The fast, bidirectional data exchange between the grandMA console and the MA NSP ensures that DMX data output on all MA NSP units is perfectly synchronized.
・Each MA NSP can calculate 2,048 parameters. A maximum of 16 MA NSP can be used for the output of 64 DMX lines (32,768 channels).
Load Case Dimensions:
Flight Case:
W:550 × D:340 × H:75mm

Titan-Net

Titan Net Processor

IPインカム

LQ-2W2 ※NEW

ネットワークセレクター

Network Selector

PAGE TOP